Lithofin KF Stain-Stop W

Lithofin KF Stain Stop W

Regular price $320.00 Sale price $385.00

Unit price per 


only -1 left in stock

 Lithofin KF Stain-Stop W For initial treatment of new floors with polished and sensitive surfaces. Prevents penetration of water and oil, protects against stains and dirt, and makes maintenance easier.

    • Ready-to-use
    • Low on solvents, water based
    • Does not form any layers
    • For indoor and outdoor use

      A special product from the LITHOFIN-Range for ceramic and porcelain tiles (KF). Lithofin KF StainStop is a water based nearly odourless impregnator consisting of a combination of high quality water and oil resistant components.
      This special impregnator effectively protects the surface against staining by inhibiting the penetration of water, oil, grease and dirt. Lithofin KF Stain-Stop does not affect the appearance of the surface.
      Technical Data:
      Density: approx. 1,0 g/cm³
      pH-Value: 3 to 6
      Appearance: liquid, yellowish, clear
      Odour: non specific
      Flash Point: approx. 36°C
      Solubility in Water: --

      Field of Use
      For protecting all newly laid absorbent polished and unglazed porcelain tiles in order to facilitate maintenance. Suitable for indoor and outdoor use.
      Directions for Use
      The surface to be treated must be completely clean and dry. Shake Lithofin KF Stain-Stop well before use. Apply undiluted with a clean cloth or a lamb’s wool roller and ensure even distribution by wiping (rolling)
      over the surface several times. For best results, treat the surface in sections of approx. 15m² at a time. After 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth.

      Attention! the liquid product must sink into the stone. Immediately wipe off puddles and drips. Do not allow the product to dry on the surface. Carefully remove all residues and check against back light.
      Please Note: impregnators are not suitable for all porcelain tiles. Always try the product in an inconspicuous area prior to use. Protect glass, varnished surfaces, plastics, etc. against splashes.

      up to 40m² per litre, depending on the absorbency of the surface.

      Keep closed, cool and dry. Shelf life of approx. 2 years. Open containers should be used quickly.
      Environmental Protection
      Solvent free, water based.
      Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.

      Ingredients: Polymers, auxiliary agents. Keep out of the reach of children. Treated surfaces present no health hazard once dry.
      Additional information is listed on the Material Safety Data Sheet.

      a) 1 litre bottle with child-proof cap (12 per box)
      b) 5 litre canister (4 per box)

      Close (esc)


      Subscribe to our mailing list!

      Age verification

      By clicking enter you are verifying that you are old enough to consume alcohol.


      Shopping Cart

      Your cart is currently empty.
      Shop now