For enhancing and polishing stone surfaces, provides gloss and protection. Takes care of all polished surfaces, and maintains their beautiful appearance. No health concerns once dry (according to report FMPA).
- easy to polish
- low on solvents, water based
A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Polish Cream is based on natural waxes, special additives and maintenance components.
Lithofin MN Polish Cream is a care product which penetrates into the surface of the stone and enhance the colour structure. With regular use, the surface can be polished to a high gloss. Surfaces become less
sensitive to staining, scratches and similar blemishes.
Used regularly, Lithofin MN Polish Cream is the optimal care treatment for marble, granite and other natural stones.
Density: approx. 0.95 g/cm³
pH-Value: approx. 10
Flash Point: >23°C
Appearance: paste, whitish
Solubility in Water: not soluble
Field of Use
For freshening up the polish and for protecting polished natural stone surfaces, especially marble.
For touching up dull areas on marble. Lithofin MN Polish Cream is highly suitable for polishing small areas such as window sills, vanity tops, kitchen work tops and similar indoor surfaces.
Please Note: on large surfaces use Lithofin MN Polish (liquid wax).
Directions for Use
Evenly apply Lithofin MN Polish Cream in circular motions using a cloth. Work in small controlled sections. After max. two minutes polish the surface with a soft cloth.
Please Note: if the product is left on the surface for too long, it becomes difficult to polish. In this case, reapply Lithofin MN Polish Cream and polish immediately.
Coverage: approx. 10 to 20m² per 500ml.
Keep closed and cool. Not above 25°C, keep tin firmly closed. Shelf life of up to two years.
For regular maintenance use Lithofin MN Easy-Care.
Contains solvents, free of chlorinated hydrocarbons . Surfactants are biodegradable according to EURegulations.
Disposal: 500ml containers are made of environmentally friendly tin plate, 125ml container s are made of environmentally friendly polyropylene (PP). Clean containers can be recycled through collection system.
No health concerns once dried according to studies of FMPA (Forschungs- und Material prüfungsanstalt Baden-Württemberg).
Label according to EU-Directive 1999/45/EG: none
Risk and Safety Phrases: harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Vapours may cause drowsiness and dizziness.
Keep out of the reach of children. Do not breathe vapour. Avoid contact with skin. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures:
remove contaminated soaked clothing immediately. No special measure necessary. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse
thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting.
If swallowed by mistake drink plenty of water and seek medical treatment.
in case of spill or other release, take up with absorbent material (e.g. sand, sawdust , general-purpose binder).
In case of fire formation of dangerous gases possible.
Product does not burn, re-extinguishing activities according to surrounding.
Additional Information is listed on the Material Safety Data Sheet.
ADR2003: not a dangerous good.
125ml tin (20 per box)
500ml tin (10 per box)