Lithofin MN Builder's Clean

Lithofin MN Builder's Clean

Regular price $244.65 Sale price $330.24

Unit price per 


only -1 left in stock

Lithofin MN Builder's Clean cleans granite, gneiss, quartzite and other natural and engineered stones. Removes cement films, stubborn dirt residues, blooms, efflorescence, rust and rust discolorations. Also acts to prevent rust in hard stones containing iron. Not suitable for polished marble, limestone etc.


approx. 15 to 30m² depending on dirt up to 50m² on polished surfaces.
Final Treatment
Many natural stones require a protective treatment which prevents the penetration of water, oil and dirt.
The LITHOFIN-Range offers suitable special products.


A special product from the LITHOFIN-Range for natural and manufactured stone (MN). This highly active cleaner contains the optimal combinations of different kinds of acid, rust preventing and cleaning agents.

Lithofin MN Builders' Clean dissolves and removes cement and mortar residues, efflorescences, limescale deposits, stubborn ingrained dirt, rust and rust discolourations.
The yellowish discolouration which results from iron containing stones rusting is removed and largely prevented.

Technical Data:
Density: approx. 1,2 g/cm³
pH-Value: < 1 (concentrate)
Appearance: liquid, reddish
Odour: pleasant, fresh
Flash Point: n.a.
Solubility in Water: complete

Field of Use
For removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolourations. Lithofin MN Builders' Clean prevents rust discolourations, which occasionally appear when cleaning iron containing stones such as serrizzo, cresciano, calanca, sardo white, etc. The product is therefore particularly suitable for those stones.
Surfaces: suitable for all acid resistant natural stones such as granite, gneiss and quarzite.
Please Note: not suitable for polished and finely honed limestones (marble) and manufactured stones. Always try the product in an inconspicuous area prior to use, since especially blue and black “granites” are often damaged.

Directions for Use
First wet the surface, then apply Lithofin MN Builder’s Clean – diluted with water up to 1:10, depending on the type of dirt – and immediately spread the product evenly on the surface with a scrubbing brush. After a few minutes, scrub the surface then wash away with clean water. Do not allow the product to dry on the surface. In stubborn cases this procedure may have to be repeated.
Advice: in case of extremely stubborn, repeated rust discolourations we recommend Lithofin BERO.
Please Note: Lithofin MN Builder’s Clean is not suitable for polished or finely honed surfaces which are sensitive to acid such as limestone, marble, manufactured stone, etc. In cases of doubt, try the product in an inconspicuous area. Surfaces such as chrome, enamel, wood, and similar acid sensitive surface must be protected against splashes and vapours. Acid containing cleaners can develop vapours which may damage sensitive surfaces. We highly recommend carefully washing the product off the surface and ensuring good ventilation during and after use.

approx. 15 to 30m² depending on dirt up to 50m² on polished surfaces.
Final Treatment
Many natural stones require a protective treatment which prevents the penetration of water, oil and dirt.
The LITHOFIN-Range offers suitable special products.

Closed, cool and dry. Shelf life of up to 5 years.

Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates. The acidic components are largely neutralised during cleaning.
Disposal: diluted product may be added to waste water.
Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.

Ingredients: <5 % non-ionic surfactants, acids, <5% NTA, scent.
Labelling according to EU-Directive 1272/2008(CLP): Symbol GHS 05, Danger
Contains phosphoric acid. May be corrosive to metals.
Causes severe skin burns and eye damage. Contains But-2- in-1,4-diol. May produce an allergic reaction.
Keep out of reach of children. Keep only in original container. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Store locked up.

a) 1 litre bottle with child-proof cap (10 per box)
b) 5 litre canister (2 per box)


Open tab

We work with the best delivery services available to ensure your products are safe and arrive at destination in the best condition.  

You can choose your delivery options at checkout. The cost will depend on your location and weight of the package. 

Your orders will arrive approximately 1 to 2 weeks from placing your order. This time frame could be altered based on your location and weight of your package.

If you have any questions about delivery please contact us.

Close (esc)

Offers and discounts

Sign up to our email list now and get exclusive offers and discounts. We won't send you spam emails, just good stuff.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Shopping Cart

Your cart is currently empty.
Shop now